Leclerc Diana 24" 16 shaft Computer Dobby Loom

The Diana 24" 16 shaft loom computer dobby loom can be operated in 2 different ways.

Using the two treadles.

The right Treadle lifts the Shafts to open the Shed. The left Treadle assists the return of the Shafts to neutral and controls the Pattern advance.

Using the front handle:

This Operating Handle lifts the Shafts and locks the Shed open freeing both Hands to operate the Loom. The Operating Handle is then lowered changing the Shed to the next pick position and completing the cycle.

The interface Box supply with the loom is self contained.

Breastbeam height is adjustable to 5 different height: from 29.75" to 35"

Delivery Info: At the time of delivery, drivers are only required to offload your freight where the truck is parked. The driver will use a lift-gate to remove your loom from the truck and to the ground only. Must ship to physical address.

Net Weight is 55 lbs. dimensions are 28"w x 36" deep, and 31.5" high. Comes with 12 dent stainless steel reed.