Warping Tools - Plain Beam Warping Tools
General
Warping Tools -
Reeds, Heddles, Texsolv, Hooks, etc.
Sectional
Warping Tools - tension boxes, spool racks,yardage counters, etc.
Boards & Reels
 |
Beka Warping Boards Available in 9 and 4.5 yard models, prices at right Beka makes economical maple warping boards. The corners butt and are fastened with barrel-type nuts. Once assembled, these warping boards are easier to store under the bed than to disassemble. Item Number: 71xx0000 |
View Cart | Check Out |
 |
Harrisville 12 yard
Warping Board $110.00 The Harrisville 12 yard Warping Board Kit is made of solid hardwood and holds a full 12 yard warp and can acommodate two crosses. Each hardwood 3/4" peg is counter-pegged and glued to insure maximum stability and the corners are fitted together with double overlapping dado joints. It is easily disassembled, with the use of corner wing nuts, for more convenient storage when not in use. It is shipped as a complete kit with detailed instructions. Item Number: 6612000W |
View Cart | Check Out |
 |
Leclerc
Warping Boards
6.5 yd warps, 22.75"x20": $60 13yd warps, 22.75"x60.5": $109 21yd warps, 22.75"x64": $127 Sturdy warping board that can easily be taken appart for storage. Can be used flat on a table or hung on the wall. Measures 22 3/4 in X 20 in. Item Number: 626xxxx0 |
View Cart | Check Out |
 |
Norwood 18 Yd Warping
Board $89.00 The Norwood warping board is expertly crafted from kiln-dried Finnish birch. Smoothly finished front and back, and includes assembly hardware. Item Number: 6700000W |
View Cart | Check Out |
 |
Schacht Warping Boards Available in 4.5 and 14 yard models Schacht warping boards, pictured here, are our favorite for durability and ease of use. They are crafted from hard maple and then sanded and oiled to a smooth finish. Double lap joints are fastened with wing-nuts making it easy to disassemble for storage. Item Number: 64xx0000 |
View Cart | Check Out |
 |
Leclerc Warping
Pegs(pair) $18.00 Useful for warping small warps. Clamps onto top of table. perfect for making kumihimo warps. Item Number: 62340500 |
View Cart | Check Out |
 |
Schacht Warping Pegs (no
clamps) $19.00 Short warps are easy to wind with our solid maple warping pegs from Schacht. Just clamp the pegs to your table or countertop with ordinary C-clamps. You choose the distance to set the pegs to get the warp length you need. Clamps not included. Item Number: 64650000 |
View Cart | Check Out |
| Louët Warping Post
with clamps Ideal for weavers with space/storage limitations. This product is basically the sides of a warping board (7 pegs per side). You mount the two sets of posts to a table or other fixed object with the supplied clamps. Once finished, the posts and clamps can be easily stored without the hassle of dismantling a warping board. Special Order |
$85.00 | |
 |
Harrisville 20-Yard
Warping Reel With Brake $285.00 Harrisville's hardwood, table-top warping reel allows you to wind longer warps faster and with less arm fatigue than with a warping board. The friction brake makes for easy chaining off. The reel has a 2 yard circumference and 30" of vertical winding space for warps up to 20 yards long. This is our most popular reel. Folds for easy storage. Item Number: 6600000W |
View Cart | Check Out |
 |
Leclerc Warping Reel, 20 yd or 40 yd reel
available $235.00 or $580.00 by size Reels are the fastest way of making chained warps with a variation of threads and colors. The cross sections that hold the pegs may be adjusted up or down, depending on the warp length. When the mill is not in use, the cross sections and pegs can be removed so that the mill folds to occupy a very limited space. Item Number: 62340x00 |
View Cart | Check Out |
 |
Louët Yarn Blocker
& Warp Reel $375.00 This is a multi-function device. You can mount up to six dowels at either reel end to maintain a cross when winding warps. The maximum warp length depends on the warp thickness and the total number of warp thread bundles.You can also use this piece for blocking/drying yarns, especially handspuns to ensure a consistent twist. If you plan to use handspun as a warp, reel the washed yarn onto the reel. Once dry, your warp is all set to go to the loom. This warping reel/yarn blocker has a circumference of 59" and a base length of 33". It folds to 36"x21"x4.5". Made of unlacquered beech. Item number: 65900000 |
View Cart | Check Out |
 |
Schacht 20-Yard Vertical
Reel $315.00 Item Number: 6464000M |
View Cart | Check Out |
 |
Schacht 20-Yard
Horizontal Reel $337.00 Item Number: 6464000H |
View Cart | Check Out |
Cone Holders
 |
Harrisville 4-Peg Cone
Holder $24.00 No matter which style you choose, these simple tools keep cones and tubes from toppling and threads from tangling. The Harrisville cone holder is the most economical. Item Number: 66040000 |
View Cart | Check Out |
 |
Leclerc 8-Peg Cone & Tube
Holder $105.00 The thread guides on this holder, mounted over the pegs, help threads feed off smoothly. Item Number: 62636110 |
View Cart | Check Out |
 |
Leclerc Doubling Stand $63.00 Great for doubling 2 strands of yarn together. Lower yarn feeds up through center of upper cone. Doubler may be mounted to wall Item Number: 61030100 |
View Cart | Check Out |
Paddles
 |
Leclerc Warping Paddle, 6
epi $20.00 With a paddle you can wind up to 20 threads at once onto your warping board or reel. The slot-and-eye design makes creating a cross as easy as lifting and lowering the paddle. We like Leclerc's paddle because its larger slots and eyes (6 per inch) can handle thick and textured yarns. Schacht's paddle with 8 spaces per inch is a bargain many prefer. Item Number: 61630000 |
View Cart | Check Out |
 |
Schacht Warping Paddle, 8
epi $20.00 With a paddle you can wind up to 20 threads at once onto your warping board or reel. The slot-and-eye design makes creating a cross as easy as lifting and lowering the paddle. We like Leclerc's paddle because its larger slots and eyes (6 per inch) can handle thick and textured yarns. Schacht's paddle with 8 spaces per inch is a bargain many prefer. Item Number: 64630000 |
View Cart | Check Out |
Raddles
 |
Harrisville Raddle Available in 22, 36, 40, and 50" lengths When warping back to front, clamp or rubber band a raddle to your back beam. The raddle spreads the warp to its proper width while you wind it onto the beam. Harrisville's raddles are appropriate for small, light looms. Pegs space the warp at one inch intervals and the middle one is stained darker so you can easily center your warp. Item Number: 66xx000R |
View Cart | Check Out |
 |
Leclerc Loop Top Raddle,
1" Spaces Available in 36, 45, and 60" lengths When warping back to front, clamp or rubber band a raddle to your back beam. The raddle spreads the warp to its proper width while you wind it onto the beam. Our loop top raddles have plated steel loops spaced at 1" intervals. To close the raddle simply slide a dowel or lease stick through the loops. Item Number: 61xx0000 Loop top raddle with 2" spaces are also available. |
View Cart | Check Out |
 Wolf Raddle |
Schacht Raddles Available for 26, 40, and 48 inch width warps Raddles help keep a warp spread even as it is wound onto the warp beam. The Schacht Raddles have built-in clamps and can be attached to either the looms back beam or the shuttle race of the beater. The raddles come with plated pins inserted every inch and with holes drilled every half inch with enough extra pins included to produce half-inch spacing. The Baby Wolf and Mighty Wolf Raddles come with special mounting brackets for the Wolf loom diagonal beams, as well as clamps for square beams or shuttle races. Item Number: 64xxxxxx |
View Cart | Check Out |
| Schacht Wolf Pup Raddle - Special order | $90.00 | |
| Schacht Wolf Raddle Available for the Baby or Mighty Wolf, special order for Wolf Pup Raddles help keep a warp spread even as it is wound onto the warp beam. The Schacht Raddles have built-in clamps and can be attached to either the looms back beam or the shuttle race of the beater. The raddles come with plated pins inserted every inch and with holes drilled every half inch with enough extra pins included to produce half-inch spacing. The Baby Wolf and Mighty Wolf Raddles come with special mounting brackets for the Wolf loom diagonal beams, as well as clamps for square beams or shuttle races. Item Number: 64xx000R |
View Cart | Check Out |
|
Lease Sticks |
||
| Leclerc Lease
Sticks Priced by size at right Lease sticks are used to hold the warp cross. Wood (24" also available in metal). Item Number: 6204xxx0 |
View Cart | Check Out |
|
If you would like a printed copy of our complete equipment catalog and price list, please call us at 1-800-341-0282 (outside the U.S. and Canada, dial 1-207-442-7909), or use our order form to request one by mail. Don't forget to browse our Book Store on the Web for books and videos on every type of weaving, for every level of experience.
