The Leclerc Nilus II Countermarche 8-Shaft Floor Loom uses a parallel countermarch design with wire cables, preventing cords from slipping off pulleys. Its sturdy harness frames improve tension and simplify warping. With only one set of lamms needed, the design reduces complexity and tie-up errors. The ergonomic back-hinge treadling enhances comfort and ease during use.
Leclerc's countermarche system has only one set of lams, two sets of pulleys above the shafts and one set of pulleys below. In a countermarche loom, every shaft is actively involved in each shed: each shaft is either lifted or pulled down by each pedal. Uneven sheds like 3 shafts against 1 are always large and clean. In the countermarche system you never have any problem with one shaft floating when it should not since you actually lift or pull down every shaft. Each shaft actively moves separately, ensuring clean, even sheds.
Equipment Included:
• 1 Stainless Steel Reed, 12 dents/inch (5 dents/cm)
• 1 Reed & Heddle Hook
• 2 Wooden Lease Sticks
• 4 Warp Rods
• Wire Heddles, 12.5" (317cm)
• 2 Canvas Aprons (front & back)
• 1 Wooden Boat Shuttle (11.75")
• 12 Plastic Bobbins (4")
• 2 Cords
• Book: "Warp and Weave"
• Assembly instructions
Additional Options (available separately):
• Inserted Eye Heddles
• Leclerc Loom Benches
• Sectional Warp Beam
• Flying Shuttle Beater
Backorder Item
Dropshipped Item
Leclerc Nilus II Countermarche 8-Shaft Floor Loom
The Leclerc Nilus II Countermarche 8-Shaft Floor Loom uses a parallel countermarch design with wire cables, preventing cords from slipping off pulleys. Its sturdy harness frames improve tension and simplify warping. With only one set of lamms needed, the design reduces complexity and tie-up errors. The ergonomic back-hinge treadling enhances comfort and ease during use.
Leclerc's countermarche system has only one set of lams, two sets of pulleys above the shafts and one set of pulleys below. In a countermarche loom, every shaft is actively involved in each shed: each shaft is either lifted or pulled down by each pedal. Uneven sheds like 3 shafts against 1 are always large and clean. In the countermarche system you never have any problem with one shaft floating when it should not since you actually lift or pull down every shaft. Each shaft actively moves separately, ensuring clean, even sheds.
Equipment Included:
• 1 Stainless Steel Reed, 12 dents/inch (5 dents/cm)
• 1 Reed & Heddle Hook
• 2 Wooden Lease Sticks
• 4 Warp Rods
• Wire Heddles, 12.5" (317cm)
• 2 Canvas Aprons (front & back)
• 1 Wooden Boat Shuttle (11.75")
• 12 Plastic Bobbins (4")
• 2 Cords
• Book: "Warp and Weave"
• Assembly instructions
Additional Options (available separately):
• Inserted Eye Heddles
• Leclerc Loom Benches
• Sectional Warp Beam
• Flying Shuttle Beater
Backorder Item
Dropshipped Item
Choose options
